4 Using Your Remote Transmitter Pres to DISARM Sect System and Unt Do gars {Press TWICE far Two-Stage Dogr:dniock?: Pres asl FAIR Open Trunk Press 0. ABM the i Security System ‘Lock Doors. Pres sand an headlights lo turn Bern BBE 18h press SIGHT br? seconds Pls TWICE Slur on”) Hear Defroster Panic Sn Arming the Security System To arm the system, exit the vehicle, close ali doors, then press” the ARM button.
Using Your Remote Transmitter (cont) Disabling the IT-s™ Interior Theft Sensor it may be necessary at times to disable the IT-s™ interior Theft Sensor, especially when parking in areas {like parking garages) where extreme vibration may cause false alarms. Press the ARM button and then press the FIND/PANIC button within hwo seconds of pressing ARM to disable the interior theft sensor. The siren will chirp three times to indicate that the sensor is disabled.
6 Using Your Remote Transmitter (cont) Using Valet Mode If the Passive Arming feature is enabled on your system, Valet mode temporarily prevents the alarm system from arming automatically. This is useful when fueling or servicing your vehicle. To enter Valet Mode: With the vehicle ignition on, press the ARM button. The red dashboard warming fight (status indicator) will turn on for one second, then tum off. This indicates that the system is in Valet mode.
Using Your Remote Starter (contd) Remote Start Safely Features For safety and security reasons, the C4500 will shut off the vehicle during remote start if any of the following occur: + The vehicle hood is opened * The brake is pressed before the vehicle ignition is turned on with the key + The engine reaches 3 limes its normal die” + The alarm is triggered As a safely precaution, the vehicle will shut off if left unattended for 12 or 24 minutes, depending on the time preset by your installer.
