User manual

44
Codabar
Read:
Format
Start Data digits (variable) Check digit (optional) End
Check digit verification: The check digit is made as the sum module 16 of the numerical values of all data
digits.
Check digit transmission: By setting Enable, check digit will be transmitted.
Max./Min. code length: Refer to Max./Min. code length of Code 39.
Code ID setting: Refer to Code ID setting of UPC-A.
Insertion group selection: Refer to Insertion group selection of UPC-A.
Start/End type: Codabar has four pairs of Start/End pattern; you may select one pair to match your
application.
Start/End transmission: Refer to Start/End transmission of Code 39.
Start/End character equality: By setting Enable, the start and end character of a Codabar barcode must
be the same.
Multiple-scan setting
Option bar code Option Alpha. entry
Single-scan setting
Disable 00
Read
Enable 01*
*
Disable 00*
*
Check digit verification
Enable 01
Disable 00*
*
Check digit transmission
Enable 01
00-99
Max. code length
00-99
00*
*
00-99
Min. code length
00-99
00*
*
00-FF
16
Code ID setting
00-FF
16
(ASCII)
<N>*
*