User manual

29
UPC-E
Read: Format
Leading zero Data digits (6 digits) Check digits
Check digit verification: The check digit is optional and made as the sum of the numerical value of the
data digits.
Check digit trans.: By setting Enable, check digit will be transmitted.
Code ID setting: Refer to Code ID setting of UPC-A.
Insertion group selection: Refer to Insertion group selection of UPC-A.
Supplement digits:
Format
Leading zero Data digits (6 digits) Check digit Supplement digits 2 or 5
Truncation/Expansion:
Truncate leading zeros- Refer to Truncation/Expansion of UPC-A.
Expand to EAN-13- It extends to 13-digits with “0” digits when the feature is set to be enabled.
Example: Barcode “0123654”,
Output: “0012360000057”.
Expand to UPC-A- It extends to 12-digits when the feature is set to be enabled.
Multiple-scan setting
Option bar code Option Alpha. entry
Single-scan setting
Disable 00
Read
Enable 01*
*
Disable 00
Check digit verification
Enable 01*
*
Disable 00
Check digit trans.
Enable 01*
*
00-FF
16
Code ID setting
00-FF
16
(ASCII)
<D>*
*
00-66
Insert group selection
00-66
00*
*
Supplement digits
None 00*
*