Owner`s manual

CS6200 CONTROL SYSTEM

VDS – Visual Diagnostic System

This indicator light activates when the heater is

“on”. It is a diagnostic tool for service

technicians.

If your system is equipped with Hydro-Quip’s exclusive, Visual Diagnostic System,

your control will do the troubleshooting for your. VDS consist of control-mounted

indicators and (if equipped) lighted component cords. You will know at a glance if a

component is being supplied with the proper voltage, if a fuse has blown or (by

simply pressing a switch) if the complete system is being supplied with voltage from

the breaker panel. The following information will guide you through the Visual

Diagnostic System.

TROUBLESHOOTING VDS SYSTEM

POSSIBLE PROBLEM

Input voltage connected incorrectly. Call

your local dealer or qualified technician.

Restricted flow of water, faulty pump or

severe weather/electrical storm. Call your

local dealer or qualified technician.

Restricted flow of water, faulty pump,

faulty blower or severe weather/electrical

storm. Call your local dealer or qualified

technician.

VDS INDICATOR ILLUMINATED

SYSTEM FUSE – This fuse protect the

rinted circuit board.

PUMP 1 FUSE – Protects the primary

ump.

AUX. FUSE – Protects the secondary

ump or blower.