Owner`s manual

CS6200 CONTROL BOX POWER SWITCH DIAGRAM
POWER SWITCH (OPTIONAL)
POWER DETECTION SWITCH (OPTIONAL)
The power test switch allows you to
verify that voltage is being supplied to
your system.
Simply press the switch toward the rear
of the enclosure to see the Line 1
voltage indicator illuminate then press
the switch toward the front of the
enclosure to see the Line 2 voltage
indicator (240-Volt Models only)
illuminate.
If equipped, your system may
incorporate a power switch. This
switch will turn power either on or
off to the internal circuitry and
connected components.
10