User manual

Code Mercenaries
2
LL
LL
EE
EE
DD
DD
--
--
WW
WW
aa
aa
rr
rr
rr
rr
ii
ii
oo
oo
rr
rr
00
00
77
77
3.1 Mechanical dimensions (LW07-01MOD)
Dimensions in mm
Height at thickest point: < 6.5 mm
Tolerances:
Outer contour: ±0.2mm
3.2 Pin Descriptions (LW07-01MOD)
DALI
Two lines for the DALI bus, not polarity sensitive,
connect direct to the DALI bus.
The DALI bus is galvanically isolated from the rest
of the circuit by opto couplers.
PWM
Positive logic PWM output, high = lamp on
Open collector output with 4k7 pull up to +5V.
Galvanically isolated from DALI bus.
/PWM
Negative logic PWM output, low = lamp on
Open collector output with 4k7 pull up to +5V.
Galvanically isolated from DALI bus.
Vin
Positive supply voltage 5.5 to 40 V.
Galvanically isolated from DALI bus.
GND
Ground supply voltage.
Galvanically isolated from DALI bus.
3.3 Mechanical dimensions (LW07-02MOD)
Dimensions in mm
Height at thickest point: < 6.5 mm
Tolerances:
Outer contour: ±0.2mm
3.4 Pin Descriptions (LW07-02MOD)
DALI
Two lines for the DALI bus, not polarity sensitive,
connect direct to the DALI bus.
The DALI bus is galvanically isolated from the rest
of the circuit by opto couplers.
Load
PWM output. Provides a chopped Ground to
directly drive constant voltage LED assemblies.
Connect the kathode end of the LEDs here and the
anode to the positive power supply. Up to 4 A.
Galvanically isolated from DALI bus.
Vin
Positive supply voltage 5.5 to 40 V.
Galvanically isolated from DALI bus.
GND
Ground supply voltage.
Galvanically isolated from DALI bus.
V1.1.1 April 22nd 2015