Data Sheet

Code Mercenaries
2
LL
LL
EE
EE
DD
DD
--
--
WW
WW
aa
aa
rr
rr
rr
rr
ii
ii
oo
oo
rr
rr
00
00
77
77
3.1 Mechanical dimensions (LW07-01MOD)
Dimensions in mm
Height at thickest point: < 6.5 mm
Tolerances:
Outer contour: ±0.2mm
3.2 Pin Descriptions (LW07-01MOD)
DA
Two lines for the IEC62386 bus, not polarity
sensitive, connect direct to the IEC62386 bus.
The IEC62386 bus is galvanically isolated from the
rest of the circuit by opto couplers.
PWM
Positive logic PWM output, high = lamp on
Open collector output with 4k7 pull up to +5V.
Galvanically isolated from IEC62386 bus.
/PWM
Negative logic PWM output, low = lamp on
Open collector output with 4k7 pull up to +5V.
Galvanically isolated from IEC62386 bus.
Vin
Positive supply voltage 5.5 to 40 V.
Galvanically isolated from IEC62386 bus.
GND
Ground supply voltage.
Galvanically isolated from IEC62386 bus.
3.3 Mechanical dimensions (LW07-02MOD)
Dimensions in mm
Height at thickest point: < 6.5 mm
Tolerances:
Outer contour: ±0.2mm
3.4 Pin Descriptions (LW07-02MOD)
DA
Two lines for the IEC62386 bus, not polarity
sensitive, connect direct to the IEC62386 bus.
The IEC62386 bus is galvanically isolated from the
rest of the circuit by opto couplers.
Load
PWM output. Provides a chopped Ground to
directly drive constant voltage LED assemblies.
Connect the kathode end of the LEDs here and the
anode to the positive power supply. Up to 4 A.
Galvanically isolated from IEC62386 bus.
Vin
Positive supply voltage 5.5 to 40 V.
Galvanically isolated from IEC62386 bus.
GND
Ground supply voltage.
Galvanically isolated from IEC62386 bus.
V1.1.4 December 5th 2019