User manual

C001537_18_CR2_User_Manual 4
Save Settings
1.3 - Reader Battery Installation
Attaching and Detaching the Lithium Ion Battery
The CR2 has an option to include a 1950 mAH Lithium Ion battery. To install battery, make sure the battery is in the
correct position (gure 1.1). Place the plastic tab of the battery into the reader (gure 1.2). Push the battery in and slide
the locking mechanism down (gures 1.3)
Charging the Lithium Ion Battery
The battery automatically charges everytime a USB or Powered RS-232 cable interface is attached to the unit and the
host is powered up.
Note: The RS-232 interface power adapter must be plugged into a wall socket for the unit to charge.
If you power-up the CR2 with a completely discharged battery it will take up to 10 minutes before the unit will become
operational.
Figure 1.1
Figure 1.3
Figure 1.2