Owner`s manual

9
Emergency Disarm Procedure
If your remote control is lost or fails to function, use this procedure to
disarm the CPL Security System and start your vehicle.
1.Use the keys to enter the vehicle.
The alarm will sound once the door is opened.
2.Insert the key into the ignition and turn to the ON position.
3.Locate and press the emergency override button.
The alarm will turn off and then you will be able to
start your vehicle.
To enter in and out of VALET without a remote transmitter.Turn the
ignition ON and OFF three (3) times.
Your Emergency Disarm Button is located:
Installer Programmed Options
Ignition On Door Lock ON OFF
Ignition Off Door Unlock ON OFF
Siren/Horn Chirps ON OFF
Passive Arming ON OFF