Owner`s manual

6
Automatic Convenience Options
The CPL Security System performs a variety of automatic functions to
enhance security and comfort. Some of these features are programmable
at the time of installation. Please see your installer for further details.
Automatic Arming
The CPL Security System will arm automatically 1 minute after the
ignition is turn off. This feature can be temporarily disabled by placing
the system into Valet mode. (If option is selected)
Ignition Lock
If all doors are closed and the vehicle is started with the key, the doors
will automatically lock.
Ignition Unlock
When the ignition is turned off, the doors will automatically unlock.
When Your Security System is Triggered
The CPL Security System will trigger if one of the following events
occurs while the system is armed:
• Any protected entrance is opened
• The vehicle ignition is turned on
• The vehicle is jolted hard enough to signal the impact detector
Once the alarm is triggered, the horn will sound and the vehicle
parking light will flash for 30 seconds. The system will then re-
arm, awaiting the next intrusion attempt. To stop the horn from
sounding while keeping the alarm armed and doors locked:
press the ARM button while the system is triggered.
The Interior Status Indicator
The Status Indicator is a high-intensity red light mounted in a visible
location on the vehicle dashboard. This red light gives a visual
indication of the alarm system’s state of operation. Note the chart
below:
If the Status Indicator is... ....then the Security System
Off is disarmed
Flashing Slowly is armed
Flashing Very Quickly was triggered in your absence
(see Attempted Intrusion ID - page 4)
Flashing Intermittently is in Valet mode
(2 flashes, off, 2 flashes)
On (not flashing) is in Pre-arm mode