Installation guide

Dome Light Delay I Theater Dimming
The system can be programed to delay arming after the lock button is pressed (60
second max) for vehicles with a dome light delay or theater dimming feature. Once
programed the system will 'learn' the timing of the dome light delay and add 2
seconds before arming.
1. Close all doors with ignition off.
2. Using the transmitter
press LOCK, UNLOCK, LOCK ,UNLOCK, LOCK,
UNLOCK, LOCK. The LED will light solid to indicate the system has
entered DOME DELAY LEARN MODE.
3. Immediately
OPEN then CLOSE the door WITHOUT disarming the
system.
The system will then monitor the door trigger wire. Once the
dome light turns off, the system will then add 2 seconds and then exit
the learning mode.
4.
The LED will begin to flash indicating the system has exited the
learning
mode and is now armed.
Feature Descriptions
Feature Bank 2 - Security
1 - Silent Choice: Controls the normal arm/disarm chirps of the security system.
ON - Silent arming/disarming upon first press of lock/unlock, pressing lock/
unlock a second time will activate the arm/disarm chirps respectively. The
system will only sound the arm/disarm chirps upon a second press of the
lock/unlock buttons.
OFF - normal arm/disarm chirps upon the first press of lock/unlock.
2 -
Passive Locks: Determines manual or automatic locking of the vehicle's
doors.
Active - Requires use
of the transmitter to lock the vehicle's doors.
Passive -
Automatically locks the vehicle's doors 1 minute after the last door
is closed
3 -
Passive Arming: Determines manual or automatic locking of the vehicle's
doors.
Active - Requires
use of the transmitter to arm the security system.
Passive -
Automatically arms the security system 1 minute after the last door
is closed
2010 Audiovox Electronics Corporation. All rights reserved.
25