Installation guide
4 BLACK/YELLOW
PULSE DURING CRANK ( - )
Locate the vehicle's second starter (crank) wire at the ignition switch. (if
equipped)
Verification: This wire registers voltage only
in
the start (crank) position of
the ignition switch.
Connect the BLACK/YELLOW wire as shown
in
the diagram below. Use an SPOT
relay (not supplied).
Fused
+12
Volt
Battery
SOUr(
e
Jump
To
PURPLE
S
tarter
Output
1---+11
Wire
From
The
Control Module
2010 Audiovox Electronics Corporation. All rights reserved. 15