Installation guide

BEFORE YOU BEGIN
PROFESSIONAL INSTALLATION
STRONGLY RECOMMENDED
Roll down window to avoid locking keys in vehicle
during installation
Avoid mounting components or routing wires near
hot surfaces
Avoid mounting components or routing wires near
mov
in g pa rts
Use grommets when routing wires through metal
surfaces
Tape or loom wires under hood for protection and
appearance
Use a Digital Multi Meter for testing and verifying
circuits.
DO NOT USE A TEST LIGHT, OR
"COMPUTER SAFE PROBEIl as these can set off air
bags or damage vehicle computers.
.
.
•
.. ..
Technical Support [phone]
or go to
http://techservices.codesystems.com
4 2010 Audiovox Electronics Corporation. All rights reserved.