Specifications

Pelco Manual C1920M-D (4/03) 53
SPECIFICATIONS
VIDEO
Input Level: 1 Vp-p, composite
NTSC: 525 lines, 60 fields/second
PAL: 625 lines, 50 fields/second
Digital Image: 768 (H) x 512 (V) pixels full screen
1536 bytes horizontal memory
26 MB display image memory
8-bit luminance, 256 shades of gray
8-bit chrominance, over 16 million colors
Format: CCIR 601 4:2:2
Sampling Rate: 13.5 MHz
Geometric Error: Less than 1 percent, all modes
Resizing: Multi-element horizontal and vertical finite impulse response
Analog Processing
Bandwidth: 20 MHz
Differential
Phase: Less than 2 degrees
Differential Gain: Less than 2 percent
Character
Generator: Programmable, bit mapped
ELECTRICAL
Operating Voltage: 120 VAC (+15/-30%), 50/60 Hz or 230 VAC (+15/-30%), 50/60 Hz
Power: Less than 25 watts
Video Inputs: Nine or sixteen
BNC, looping with programmable termination, 75 ohms or Hi-Z
Monitor Outputs: Two (simplex) or three (duplex)
Main (duplex): BNC, 75 ohms
4-pin mini-DIN, YC output (SVHS)
Spot: BNC, 75 ohms
Main (simplex): BNC, 75 ohms
Aux (duplex): BNC, 75 ohms
VCR Inputs: One
VCR In: BNC, composite, 75 ohms
4-pin mini-DIN, YC input (SVHS)
VCR Outputs: One
VCR Out: BNC, composite, 75 ohms
4-pin mini-DIN, YC input (SVHS)
Alarm Inputs: Sixteen individually programmable for NO or NC
Alarm Output: One Form-C relay, 0.5 A continuous, 1.0 A momentary
GENERAL
Operating
Temperature: 32° to 122°F (0° to 50°C)
Relative Humidity: 90% (non-condensing)
Construction: Aluminum
Finish: Black
Dimensions: 1.75 (H) x 17.2 (W) x 12.2 (D) inches (4.45 x 43.69 x 30.99 cm)
Weight: 10.6 lb (4.8 kg)
(Design and product specifications subject to change without notice.)