Specifications

48 Pelco Manual C1920M-D (4/03)
Table F. Operation Guide (continued)
OPERATION MODEL FRONT PANEL COMMAND RESULT
S/D
S/D
S/D
S/D
D
S
Sequence multiple
cameras in one
location of a 4-, 9-,
or 16-camera
display.
(Does not work in
RECORD mode for
simplex models.)
Sequence PIP
display.
(Does not work in
RECORD or VCR
modes for simplex
models.)
Stop a sequence.
Zoom on a camera.
(Does not work in
RECORD mode for
simplex models.)
Record a tape.
The sequence runs until the SE-
QUENCE button is pressed or until
another camera or multi-camera
display is selected.
Sequences all active cameras in the
PIP display.
Stops the sequence. The monitor
displays video from the camera on
which the sequence stops.
Stops a sequence if one is in
progress. Displays a 2X or 4X zoom
of the camera selected on the main
monitor.
Records all cameras connected to the
multiplexer.
1. Select the desired multi-camera
display.
2. Press and hold the multi-camera
display button to enter multi-
camera programming mode. A bar
will appear in the first camera
location.
3. Use the arrow buttons to move
the on-screen bar to the desired
camera location for sequencing,
and press the SEQUENCE button
to initiate the sequencing of all
active cameras.
1. Push the button.
2. Push the SEQUENCE button.
Press the SEQUENCE button
once or press any camera button
to stop a sequence on the main
monitor. Press the SEQUENCE
button twice to stop a sequence
on the spot monitor.
1. Press the camera button.
2. Press the button below the
ZOOM icon. The display will
zoom to 2X magnification.
3. Use the arrow buttons to
control the zoom location.
4. Press the zoom button again to
increase zoom to 4X.
5. To exit, press the zoom button
a third time.
Recording is done automatically
as long as a VCR is connected
and it is in RECORD mode.
Recording is done automatically
as long as a VCR is connected
and both the multiplexer and VCR
are in RECORD mode. While the
multiplexer is in RECORD mode
(RECORD LED is on), you can
only see a full-screen view of one
camera (or one camera at a time
if sequencing) on the main
monitor.
(Continued on next page)