Specifications
Pelco Manual C1920M-D (4/03) 47
Table F. Operation Guide (continued)
OPERATION MODEL FRONT PANEL COMMAND RESULT
D
S
S/D
S/D
S/D
S/D
D
S
D
S/D
S/D
Call a group of
cameras.
(Does not work in
RECORD mode for
simplex models.)
Display a picture-in-
picture (PIP) insert.
(Does not work in
RECORD or VCR
modes.)
Display selected
cameras in multi-
screen modes.
Run a sequence of
cameras on the
main monitor.
Run a sequence of
cameras on the
spot monitor.
1. Make sure the LIVE/VCR LED on
the left of the front panel is ON. If
the light is not on, press the LIVE/
VCR button to toggle the light ON.
1. Make sure the monitor displays
“LIVE”. If it does not, press the
DISPLAY/RECORD button once
or twice until it does.
2. Press the button below the 4, 9,
or 16 icon.
3. Continue pressing the button until
the correct group is displayed.
1. Press the button of the camera
you want to display full size.
2. Press the PIP icon button.
3. Press the button of the camera
you want to display in the insert.
4. To change the display in the
insert, press another camera
button.
5. To exit, press the PIP icon button.
This is accomplished through
reprogramming. Refer to the
Multiple
Camera Display Setup
section.
1. Press the LIVE/VCR button to
select live or tape playback mode.
The LED is ON in live mode.
1. To sequence individual cameras,
make sure the monitor shows a
full-screen view of any camera (all
modes). To sequence groups of
cameras, make sure the monitor
shows a four- or nine-camera
display (LIVE and VCR modes
only).
2. To sequence individual cameras,
make sure the monitor shows a
full-screen view of any camera. To
sequence groups of cameras,
make sure the monitor shows a
four- or nine-camera display.
3. Press the SEQUENCE button.
Press the SEQUENCE button twice.
Displays the group of cameras on the
main monitor.
The full-size view appears on the main
monitor with the PIP insert.
Changes which cameras appear in the
multi-screen display.
Starts the programmed sequence of
individual cameras on the main monitor.
Starts the sequence of individual
cameras on the spot monitor.
(Continued on next page)