Specifications

34 Pelco Manual C1920M-D (4/03)

CAMERA SETUP (CAMERA BUTTONS)

OPEN

CLOSED

VIDEO INPUT TERMINATION 75 OHM

ALARM INPUT NORMALLY OPEN

COAXITRON FORMAT EXTENDED

ACTIVITY DETECTION ENABLED

SET DETECTION MASK

ENABLED

DISABLED

* ONLY NINE CHARACTERS APPEAR WHEN IN THE 16-CAMERA DISPLAY.

EXTENDED

OFF

STANDARD

CAMERA 1 NORMAL

NORMAL

COVERT

‹

›

, (COMMA)

Figure 25. Basic Camera Menu

To program a camera input:

1. Press the desired CAMERA button for approximately three seconds until the Camera

menu appears. Type the password, if requested. The currently selected menu item

blinks.

A video insert appears that shows what the camera is viewing. This helps ensure you

have selected the correct camera and lets you see how video is affected when you

select a menu option.

2. Use the arrow buttons to move between items on the screen.

3. When the menu item you desire is highlighted (blinking), press the +/- button to cycle

through the options to select the one you want. Use the right arrow button to advance

to the next character position when titling a camera.

Normal/Covert Mode

NORMAL – Use when you want the camera view to appear on the monitor. This is the

default.

COVERT – Use when you want to record a camera view but do not want the picture to

appear on the monitor. The monitor will show only the camera number on a black

background; however, the videotape will record what the camera sees. (You might use

this if you do not want the operator or visitors to see the picture but want it recorded.)

You can set each camera individually.

(If you play back the tape on the same equipment, any covert picture will still appear

blanked. Change the setting to NORMAL to see the picture.)