Specifications

Pelco Manual C1920M-D (4/03) 29
BLANK - Lets you view an individual camera, but you cannot run a sequence. An
alarm or activity detection will override the camera you are viewing. When the alarm or
activity detection goes away, the screen will return to the camera you were viewing.
Press the Sequence button to return to a blank screen.
SEQUENCE - Lets you view an individual camera or run a sequence. An alarm or
activity detection will override what you are observing. When the alarm or activity
detection goes away, the screen will return to the camera or sequence you were
viewing.
TRACK MAIN - The spot monitor will follow the camera switching that occurs on the
main monitor. This feature is used when a KBD4000 keyboard is connected to the
multiplexer for controlling moveable cameras on the main monitor.
Aux Monitor Display (Duplex Model Only)
Select ALARMS, ACTIVITY, or ALARMS OR ACTIVITY if you want the auxiliary
monitor to show cameras with alarms or activity detection. If you are using the
auxiliary monitor to sequence all cameras and you do not want alarms or activity
detection to override the sequence, select NONE.
BLANK - The screen will remain blank unless there is an alarm or activity detection.
SEQUENCE - The monitor will sequence all cameras unless there is an alarm or
activity detection.
CAM 1 through CAM 16 - The monitor will display the selected camera unless there is
an alarm or activity detection.
Camera Types
The COLOR & B/W setting lets the multiplexer adapt to the combination of both color
and monochrome video signals. The multiplexer’s switching speed is slower when it
must change formats between monochrome and color cameras.
• For duplex monochrome models, you will not receive color from a color camera
except on the spot and auxiliary monitor displays.
• For simplex monochrome models, you will not receive color from a color camera
except in RECORD mode.
The RESERVED setting can improve performance when using cameras with non-
standard sync or poor video quality.
Unit ID
This is the multiplexer’s address. If your system has more than one multiplexer, each
multiplexer must have its own address. (Incorrect Unit ID and Comm Type entries are
common causes of playback and P/T control problems.) Refer to Figure 22.
DATE FORMAT MM-DD-YY
PASSWORD DISABLED
FRONT PANEL CONTROL ENABLED
MAIN MONITOR DISPLAY
RESPONDS TO NONE
SPOT MONITOR DISPLAY SEQUENCE
RESPONDS TO ALARMS
* AUX MONITOR DISPLAY BLANK
* RESPONDS TO ACTIVITY
CAMERA TYPES ALL COLOR
UNIT ID 001
COMM. TYPE MASTER (KBD-T/D)
RELAY OUTPUT ALARM
DATE FORMAT MM-DD-YY
PASSWORD DISABLED
FRONT PANEL CONTROL ENABLED
MAIN MONITOR DISPLAY
RESPONDS TO NONE
SPOT MONITOR DISPLAY SEQUENCE
RESPONDS TO ALARMS
* AUX MONITOR DISPLAY BLANK
* RESPONDS TO ACTIVITY
CAMERA TYPES ALL COLOR
UNIT ID 002
COMM. TYPE SLAVE
RELAY OUTPUT ALARM
DATE FORMAT MM-DD-YY
PASSWORD DISABLED
FRONT PANEL CONTROL ENABLED
MAIN MONITOR DISPLAY
RESPONDS TO NONE
SPOT MONITOR DISPLAY SEQUENCE
RESPONDS TO ALARMS
* AUX MONITOR DISPLAY BLANK
* RESPONDS TO ACTIVITY
CAMERA TYPES ALL COLOR
UNIT ID 003
COMM. TYPE SLAVE
RELAY OUTPUT ALARM
MULTIPLEXER 1 MULTIPLEXER 2 MULTIPLEXER 3
*DUPLEX MODEL ONLY
Figure 22. Multiplexer Menus for Multiple Units in One System
NOTE: Do not program
the unit ID from the
keyboard. It must be
programmed from the
front panel.