Manualshelf

Specifications

ManualsBrandsCode Alarm ManualsAutomotiveSRT 6700
11121314151617181920
20 Pelco Manual C1920M-D (4/03)
Figure 17. Connecting Duplex Mulitplexer to a CM6700 SCU and Multiple Keyboards
1
2
3
45
6
7
8
R+R-T-T+
LOCAL
O
N
O
N
1234
1234
1
2
3
4
5
6
7
8
12 VAC
1
2
3
4
5
6
7
8
O
N
O
N
1234
1234
KBD300
KBD300
MULTIPLEXER
MULTIPLEXER
WALL BLOCK
WALL BLOCK
TERMINALS
USER SUPPLIED CABLE
BETWEEN REMOTE
KEYBOARD PORT AND
ALL WALL BLOCKS
TO ADDITIONAL
KEYBOARDS
KBDKIT
VIDEO INPUTS
1 3 5 7 9 1 13 15
2 4 6 8 10 12 14 16
VIDEO OUTPUTS
1
2
3
4
VC
AU
MAI
SPO
SVH
OUT
IN COM
NNH
OC
C
S
ALARM
12345678 91011 14151612 13
110-240V 50/60 Hz
O
N
1234
VCR
AUX
MAI
SPOT
SVHS
OUT
IN COM
NN
H
C
C
S
ALARMS
12345 67 8 10 14 15 1612 13
CM6700 MATRIX SWITCHER
MX4000 MULTIPLEXER
KBD300
110-240V 50/60 Hz
VIDEO
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
VIDEO
1
2
3
4
LOCAL
KEYBOARD
Figure 16. Connecting Duplex Mulitplexer to a CM6700 SCU and Single Keyboard
NOTE:
To daisy-chain
multiplexers, use the 6-foot
(1.8 m) data cables supplied
with each multiplexer. Con-
nect a cable from the first
multiplexer’s COM OUT port
to the second multiplexer’s
COM IN port. Connect from
COM OUT to COM IN until
you have daisy-chained
eight units, if desired.
This installation is more effective than using the MX4000SVR server. Using the CM6800
provides the following:
• Support of up to eight monitors instead of four
• Support of M devices, such as the KBD960 keyboard
• Maximum of 18 keyboards instead of four
• Support of additional cameras that are not going through the Genex
Also, the CM6800 macros include multiplexer control allowing you to build sequences that
include a combination of multi-camera and/or single camera displays.
The installation in Figure 15 is for up to eight monitors and eight multiplexers connected to
a CM6800-48X8.
1. Connect up to eight monitors to the video outputs on the CM6800.
2. Daisy-chain up to eight multiplexers and connect them to any of the 48 inputs on the
CM6800.
3. Connect up to 18 keyboards to COM ports 3, 5-8 on the CM6800.
9
(OPTIONAL) MULTIPLEXER WITH CM6700 SWITCHER/
CONTROLLER UNIT (DUPLEX MODELS ONLY)