Specifications

December 2013
REQUEST FOR PROPOSALS FOR
PURCHASE AND DELIVERY OF HEAVY-DUTY BUSES
RFP SRTA-2014-01
TECHNICAL SPECIFICATIONS
PAGE-76


Horizontal turning envelope (see diagram below)
Outside body turning radius, TR0 (including bumper) ft in.
Front inner corner radius, TR1 ft in.
Front wheel inner turning radius, TR2 ft in.
Front wheel outer turning radius, TR3 ft in.
Inside Body Turning Radius innermost point, TR4 (including bumper) ft in.
Wheel base
Front in.
Rear in.
Overhang, centerline of axle over bumper
Front in.
Rear in.
Floor
Interior length ft in.
Interior width (excluding coving) ft in.
Total standee area (approximately) ft
2
Minimum distance between wheelhouses: Front in.
Rear in.
Center in.
Maximum interior floor slope (from horizontal) deg
Passenger capacity provided
Total maximum seating
Standee capacity
Minimum hip to knee room in.
Minimum foot room in.
Weight
No. of
people
Front axle Center axle Rear axle
Total
bus
Left Right Total Left Right Total Left Right Total
Empty bus, full
fuel and farebox
Fully seated, full
fuel and farebox