Specifications

December 2013
REQUEST FOR PROPOSALS FOR
PURCHASE AND DELIVERY OF HEAVY-DUTY BUSES
RFP SRTA-2014-01
TECHNICAL SPECIFICATIONS
PAGE-71



f. Metal plate type decal "For optimum air conditioning, keep windows closed" to be located
at the center horizontal window ledge between each window in locations approved by the
SRTA. The SRTA shall provide a sample to the Contractor.

g. Metal plate type decals for the chime system shall be provided at each window mullion
and in appropriate areas at the wheelchair tie downs.

h. All emergency exit instructions shall be metal plates installed in SRTA approved
locations, or as required by law. The rear door "breakout" panel shall have the
emergency instructions printed directly on the plastic panel in lieu of a metal plate.

i. Metal plate type decal “Do not push on exit door” shall be located on each door leaf of
the rear doors in a location approved by the SRTA.

24.4 Exterior Decals and Signs

a. Exterior coach numbers in seven (7) locations shall be four inch (4") Scotchlite, reflective
type material, or approved equal. Locations are listed below:

Bus Numbers:
Quantity: 1 per bus, Color: Black, Size: 4” high, Location: Interior-rear engine
door.
Quantity: 5 per bus, Color: White, Size: 4” high, Locations: Roadside 2 numbers,
curbside 2 numbers, front on Russett paint (over headlight).
Quantity: 1 per bus, Color: Black, Size: Each number 4” high – stacked, Location:
Rear cap.

b. "Diesel Fuel", to be located inside fuel filler door, manufactured of metal or plastic
engraved.

c. "Caution Water Hot", to be located inside surge tank filler door, manufactured of metal or
plastic engraved.

d. "Caution-Negative Ground", to be located inside battery compartment door as well as all
necessary instructions to operate the battery disconnect switch(es), manufactured of
metal or plastic engraved.

e. "Battery Cut-off Switch Inside", manufactured of metal or plastic engraved, to be
furnished and installed by the Contractor on the outside of the battery box compartment
per sample provided by the SRTA.

f. The International Handicapped Symbol shall be furnished and installed at one (1)
approved location. This symbol must be the white symbol on a blue background,
manufactured from 3M Scotchcal, or approved equal. Final size and location shall be
designated and approved by the SRTA.

g. Bus Numbers. Color: White Helvetica, Location: Interior Front Header (centered).
Color: Black Helvetica, Location: Aft side of interior air tank closeout to curbside of “Stop
Request” sign.

h. Passenger Rules Decal (required) “No Smoking, Eating/Drinking, Radio”, Quantity: 2,
Locations: (1) at rear bulkhead I/O panel door, (1) at AFT side of air tank enclosure
below “Stop Request” sign.

i. Video Surveillance Decals (required).

j. "Exact Fare Please", manufactured from 3M reflective vinyl, or approved equa, decal
shall be furnished and installed by the Contractor per the sample furnished by the