Owner`s manual

3
Using Your Remote Control
Locking the System
To lock the system, press the LOCK button. The parking lights will flash 2 times and the horn will sound 2 times
indicating the system has locked the doors (if equipped and connected) and activated the starter disable feature.
The status indicator (blue warning light on the dash) will blink steadily, once per second. To lock the system
silently, press and hold the LOCK button for 1 second. The parking lights will flash 2 times, indicating the system
has locked the doors (if equipped and connected) and activated the starter disable feature. The status indicator
(blue warning light on the dash) will blink steadily, once per second.
Unlocking the System
To unlock the system press the UNLOCK button. The parking lights will flash 1 time and the horn will sound 1 time
indicating the system has unlocked the doors (if equipped and connected) and deactivated the starter disable
feature. To disarm the system silently, press and hold the UNLOCK button for 1 second. The parking lights will
flash 1 time, indicating the system has unlocked the doors (if equipped and connected) and deactivated the starter
disable feature.
Disabling/Enabling Confirmation Chirps
1. Turn the ignition key ON then OFF.
2. Within 10 seconds push and release the valet/override button 3 times.
3. The system will sound 2 times to disable confirmation chirps or 1 time to enable confirmation
chirps.
Two Stage Door Unlock (Optional)
If this feature is enabled on your system, pressing the UNLOCK button one time on the remote control will unlock
only the driver’s door. Press UNLOCK again to unlock the remaining doors.
Activating the Trunk Release Feature (Optional)
If this feature is enabled on your system, pressing and holding the TRUNK button on the remote control for 2
seconds will open the vehicle’s trunk or hatch.
*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for
more than 2 seconds.