Specifications

E5CN

CHARACTERISTICS

Indication accuracy Thermocouple:

( 0.5% of indicated value or 1 C, whichever greater) 1 digit max. (See Note.)

Platinum resistance thermometer:

( 0.5% of indicated value or 1 C, whichever greater) 1 digit max.

Analog input: 0.5% FS 1 digit max.

CT input: 5% FS 1 digit max.

Hysteresis 0.1 to 999.9 EU (in units of 0.1 EU)

Proportional band (P) 0.1 to 999.9 EU (in units of 0.1 EU)

Integral time (I) 0 to 3999 s (in units of 1 s)

Derivative time (D) 0 to 3999 s (in units of 1 s)

Control period 1to99s(inunitsof1s)

Manual reset value 0.0% to 100.0% (in units of 0.1%)

Alarm setting range -1999 to 9999 (decimal point position depends on input type)

Sampling period 500 ms

Insulation resistance 20 MΩ min. (at 500 VDC)

Dielectric strength 2000 VAC, 50 or 60 Hz for 1min (between different charging terminals)

Vibration resistance 10 to 55 Hz, 10 m/s

for 2 hours each in X, Y and Z directions

Shock resistance 300 m/s

, 3 times each in 3 axes, 6 directions (relay: 100 m/s

)

Weight Approx. 150 g Mounting bracket: Approx. 10g

Protective structure

Front panel NEMA4 for indoor use (equivalent to IP66)

Rear case IP20

Terminals IP00

Memory protection EEPROM (non-volatile memory) (number of writes: 100,000)

EMC Emission Enclosure: EN55011 Group 1 class A

Emission AC Mains: EN55011 Group 1 class A

Immunity ESD: EN61000-4-2: 4 kV contact discharge (level 2)

8 kV air discharge (level 3)

Immunity RF-interference: ENV50140: 10 V/m (amplitude modulated,

80MHzto1GHz)(level3)

10 V/m (pulse modulated, 900 MHz)

Immunity Conducted Disturbance: ENV50141: 10 V (0.15 to 80 MHz) (level 3)

Immunity Burst: EN61000-4-4: 2 kV power-line (level 3)

2 kV I/O signal-line (level 4)

Approval standards UL3121-1, CSA22.2 No. 14, E.B.1402C

Conforms to EN50081-2, EN50082-2, EN61010-1 (IEC1010-1)

Conforms to VDE0106/part 100 (Finger Protection), when the terminal cover is mounted.

Note: The indication of K thermocouples in the -200 to 1300°C range, and T and N thermocouples at a temperature of -100°C or less,

and U and L thermocouples at any temperature is ±2°C±1 digit maximum. The indication of B thermocouples at a temperature of

400°C or less is unrestricted.

The indication of R and S thermocouples at a temperature of 200°Corlessis±3°C±1 digit maximum.