Operating instructions

Advanced Features

English

2 The radio continues scanning the remaining channels in the

list.

Using the Menu Select button:

1 Press the Menu Select button directly below DynP to

change the priority of a non-priority channel in the scan list

to Priority-Two.

2 Press H momentarily to exit the scan list and resume

scanning.

Deleting a Nuisance Channel

If a channel continually generates unwanted calls or noise

(termed a “nuisance” channel), you can temporarily remove the

unwanted channel from the scan list.

This capability does not apply to priority channels or the

designated transmit channel.

Note: Deleting a “nuisance” channel is only possible through

the preprogrammed Nuisance Channel Delete

button. This feature is not accessible through the

menu.

Procedure:

Using the preprogrammed button:

1 When the radio is locked onto the channel to be deleted,

press the preprogrammed Nuisance Delete button.

2 The radio continues scanning the remaining channels in the

list.

Using the Menu Select button:

1 When the radio is locked onto the channel to be deleted, >

or < to NuisDel.

2 Press the Menu Select button directly below NuisDel.

Restoring a Nuisance Channel

Procedure:

To restore the deleted nuisance channel, do one of the

following:

• Turn the radio off and then turning it on again.

• Stop and restart a scan via the preprogrammed Scan button

or menu.

• Change the channel via the Mode knob.



O9Head_68007024014_a.book Page 54 Wednesday, June 9, 2010 5:36 PM