Operating instructions

Advanced Features
English
104
Using the Manual Siren Button as Siren Types
Selector
e can also be preprogrammed as siren types selector. For
example, pressing the button changes the current siren tone to
another siren tone.
Procedure:
When a siren tone is sounding,
1 Press e to change the siren.
2 Repeat step 1 to change to another siren.
OR
Press the preprogrammed siren button to turn off the siren.
Using the Public Address Button
This button enables the external speaker to be able to transmit
the radio user announcement publicly.
Procedure:
Press c to toggle the public address feature on or off.
Using the Response Selector
The Response Selector is mainly designed to control the
lightbar. The recommended application of Response Selector
for the lightbar is as below.
• Turn to 0 – the lightbar is off.
• Turn to 1 – the lightbar is in take down mode.
• Turn to 2 – the lightbar is in pursuit mode without the siren.
• Turn to 3 – the lightbar is in pursuit mode with siren enabled.
Once you turn the knob to the required number, except 0, the
number will have green backlight to indicate it is activated.
Response Selector can also be preprogrammed to support
other functions such as siren, send status update and GPS.
Procedure:
1 Turn the knob to 1, 2 or 3. The radio executes the
preprogrammed actions.
2 Turn to another number to change the required actions.
OR
Turn the knob to 0 to turn off the actions.
Note: If the Response Selector is pointing at 1, 2 or 3 during
power up, the radio will execute the selected actions
upon powering up.



O9Head_68007024014_a.book Page 104 Wednesday, June 9, 2010 5:36 PM