Specifications

DS7400Xi Ver. 3+ Reference Guide Copyright © 2004 Detection Systems, Inc. P/N: 28995K Page 55
11.27 Account Code Programming: Program Addresses (0496-0526)
Account Code programming defines the number transmitted to
the central station that identifies this panel. It also identifies
which partition is reporting from this panel.
1. Account Codes are programmed from left to right. If programming a 3 digit Account Code, the fourth digit of the address must be “0.”
For example: If the Account Code is 121, program 1210 in the programming address.
2. If you wish to send a zero “0,” enter it as *0 (this does not apply to the added zero in a three digit Account Code).
For example: If the Account Code is 101, program 1*010 in the programming address. If the Account Code is 3050, program 3*05*0 in
the programming address.
Example:
To program Partition 1 Phone #1 Account Code to be 2332.
Data Digit 1 = [2], Data Digit 2 = [3], Data Digit 3 = [3], Data Digit 4 = [2]
.
Enter the Programmer’s Mode: [9] [8] [7] [6] [#] [0]
Enter the Program Address: [0] [4] [9] [6]
Enter Data Digit 1: [2]
Enter Data Digit 2: [3]
Enter Data Digit 1: [3]
Enter Data Digit 2: [2]
Enter the pound key: [#]
Program the next Address, Program a different Address, or Exit the Pro-
grammer’s Mode.
D
a
t
a
D
i
g
i
t
s
Phone #1 Account Code = Address 0500
Phone #2 Account Code = Address 0498
1234
Phone #1 Account Code = Address 0496
Phone #2 Account Code = Address 0502
Phone #1 Account Code = Address 0508
Phone #2 Account Code = Address 0506
Phone #1 Account Code = Address 0504
Phone #2 Account Code = Address 0510
The Default for all
Account Codes = 0000
Partition 1
Partition 2
Partition 3
Partition 4
Phone #1 Account Code = Address 0516
Phone #2 Account Code = Address 0514
Phone #1 Account Code = Address 0512
Phone #2 Account Code = Address 0518
Phone #1 Account Code = Address 0524
Phone #2 Account Code = Address 0522
Phone #1 Account Code = Address 0520
Phone #2 Account Code = Address 0526
Partition 5
Partition 6
Partition 7
Partition 8