Specifications
DS7400Xi Ver. 3+ Reference Guide Copyright © 2004 Detection Systems, Inc. P/N: 28995K Page 44
11.10 Keypad Assignment Programming: Program Addresses (0173-0180)
Keypad Assignment Programming is where you assign the keypad type
and the partition it belongs to.
See Glossary (section 6.6) for further details.
Each keypad must have its own Bus address. This must also be
selected on the keypad via its address pins. See In Guide P/N
25902. One keypad must be selected as keypad 1.
Defaults: The default, if using only one keypad, is an Alpha keypad
belonging to partition one.
* = When in Commercial Fire Mode, certain keypads must have specific assignments (see section 6.11).
** = Keypads 11-15 are connected to the Option Bus. If the DS7412 is connected to the Option Bus (at
keypad address 13 or 14), keypad 13 or 14 is unavailable. Similarly, if the DS7420i is connected to the
Option Bus at keypad address 15, keypad 15 is unavailable; and if the DS7488 is connected to the Option
Bus at keypad address 11-15, the corresponding keypad(s) is (are) unavailable.
*** = If only using one partition, do not program keypads as Master Keypads.
Only program for a Master Keypad if you need to view multiple partitions from a
single keypad.
11.11 Keypad Partition Assignment: Program Addresses (0208-0215)
Data Digit 1 Data Digit 2
K
eypad 1*
default = 1
Program Address 0173
Data Digit 1 Data Digit 2
Program Address 0174
Data Digit 1 Data Digit 2
Program Address 0177
Data Digit 1 Data Digit 2
Program Address 0178
Data Digit 1 Data Digit 2
Program Address 0175
Data Digit 1 Data Digit 2
Program Address 0176
Data Digit 1 Data Digit 2
Program Address 0179
Data Digit 1 Data Digit 2
Program Address 0180
Keypad 2
default = 0
Keypad 3
default = 0
Keypad 4
default = 0
Keypad 5
default = 0
Keypad 6
default = 0
Keypad 7
default = 0
Keypad 8
default = 0
Keypad 10
default = 0
Keypad 9
default = 0
Keypad 11**
default = 0
Keypad 12**
default = 0
Keypad 15**
default = 0
Keypad 14**
default = 0
Keypad 13**
default = 0
** ** *
LCD Backlight Off Until Keypress
Select Options
LCD Backlight Always On
0 1
Alpha (LCD) Keypad
LED Keypad
Select Options
0 1 2 3
Disabled
Master Keypad***
Data Digit
12
Backlight selection affects all LCD keypads
Example:
To program Keypad 1 as an Alpha Keypad that is assigned to Partition 1.
PA 0173: Data Digit 1 = [1], Data Digit 2 = [0].
PA 0208: Data Digit 1 = [2], Data Digit 2 = [0].
Enter the Programmer’s Mode: [9] [8] [7] [6] [#] [0]
Enter the Program Address: [0] [1] [7] [3] (Data Digit 1)
Enter Data Digit 1: [1]Enter Data Digit 2: [0]Enter the pound key: [#]
Enter the Program Address: [0] [2] [0] [8]
Enter Data Digit 1: [0]Enter Data Digit 2: [0]Enter the pound key: [#]
Program the next Address, Program a different Address, or Exit the
Programmer’s Mode.
1
2
3
4
5
6
7
0Belongs to Partition 1
Belongs to Partition 2
Belongs to Partition 3
Belongs to Partition 4
Belongs to Partition 5
Belongs to Partition 6
Belongs to Partition 7
Belongs to Partition 8
Select Option D
D
0
Data Digit 1 Data Digit 2
Keypad 7 Keypad 8
Program Address 0211
Data Digit 1 Data Digit 2
Keypad 15 Must Be 0
Program Address 0215
0
Data Digit 1 Data Digit 2
Keypad 13 Keypad 14
Program Address 0214
Data Digit 1 Data Digit 2
K
eypad 1 Keypad 2
P
rogram Address 0208
Data Digit 1 Data Digit 2
Keypad 3 Keypad 4
Program Address 0209
Data Digit 1 Data Digit 2
Keypad 5 Keypad 6
Program Address 0210
Data Digit 1 Data Digit 2
K
eypad 9 Keypad 10
P
rogram Address 0212
Data Digit 1 Data Digit 2
Keypad 11 Keypad 12
Program Address 0213