Specifications

DS7400Xi Ver. 3+ Reference Guide Copyright © 2004 Detection Systems, Inc. P/N: 28995K Page 35
If the chart looks like this, only a single feature is available to be programmed for that particular address.
Disabled
Perimeter Instant
24-Hour
Entry/Exit Delay #1
Entry/Exit Delay #2
1
2
3
4
0
Enter one of these numbers
for the appropriate data digit
Represents the option/feature
available for this address.
Example:
To select Disabled,
enter the data digit as a 0.
To select Entry/Exit Delay #2,
enter the data digit as a 4.
Select Option DD
Some pages may also include a Default chart that looks like this:
Zone Function
1
2
3
0001
0002
0003
23
24
21
Address Default
9.7 Exiting the Programmer’s Mode
To exit the Programmer’s Mode, press the [*] key for a minimum of 2 seconds. If no keypad entries are made for 4 minutes, the control will
automatically exit you from the Programmer’s Mode.
10.0 Understanding the Programming Charts
The Programming Reference Guide makes use of three types of charts. Each is described below.
f the chart looks like this, a combination of features is available to be programmed for that particular address.
0Select Options 1 2 3 4 5 6 7
Feature 1
Feature 2
Feature 3
Feature 4
Enter the Data Digit as a:
Identifies the options/features
available for this address
Enter one of these numbers
for the appropriate data digit
The dots represent which
options/features are included
with each selection
Example:
To select Feature 2 only,
enter the data digit as a 1.
To select Feature 2 and
Feature 4,
enter the data digit as a 5.
I