Instruction manual

7400 & 7450 Manual
Programming
Page 43
4.15 REPLACING A PROGRAMMING CODE
F
Note:
• The keypad must be in its Normal Mode for the
procedure to work. Insure that the Mode Indicator LED is
green before proceeding.
1) Remove power from the keypad.
2) Depress and hold the REX push button.
3) Re-apply power to the keypad with the REX push button depressed.
4) Release the REX push button.
5) You now have 15 seconds to program a new Programming Code into
the keypad using the initial default code (1234), before the keypad
reverts to the existing code.
THE DEFAULT CODE DEPENDS ON THE PIN LENGTH SELECTED
REFER TO THE PROGRAMMING MENU ON PAGE 19
4.15 REPLACING A NORMAL/SECURE CODE
F
Note:
• The keypad must be in its Secure Mode for the
procedure to work. Insure that the Mode Indicator LED is
red before proceeding.
1) Remove power from the keypad.
2) Depress and hold the REX push button.
3) Re-apply power to the keypad with the REX push button depressed.
4) Release the REX push button.
5) You now have 15 seconds to use the default Normal/Secure Code
(3838) to return to Normal Mode. Once in Normal Mode, enter the
Programming Mode to program a new Normal/Secure Code.
THE DEFAULT CODE DEPENDS ON THE PIN LENGTH SELECTED
REFER TO THE PROGRAMMING MENU ON PAGE 19