Instruction manual

7400 & 7450 Manual
Table of Contents
4. PROGRAMMING
4.1 INTRODUCTION
4.1.1 Entering Programming Mode
4.1.2 Exiting Programming Mode
4.2 CHANGING THE OPEN CODE
4.3 CHANGING NORMAL/SECURE
4.4 CHANGING PROGRAMMING CODE
4.5 CHANGING NORMAL/SECURE CODE
4.6 CHANGING NORMAL/BYPASS CODE
4.7 SETTING FAIL SAFE/SECURE
4.8 SETTING AUXILIARY MODES
4.8.1 General
4.8.2 Auxiliary Mode Setting Guide
4.9 SETTING LOCK OUT
4.10 BACKLIGHT & LED BEHAVIOR
4.11 ENROLLING CODES
4.11.1 PrimaryCodesDenition
4.11.2 SecondaryCodesDenition
4.11.3 Primary & Secondary Enrolling Methods
4.11.4 Standard Method for Enrolling Codes
4.11.5 Search Method for Enrolling Codes
4.12 DELETING CODES
4.12.1 Standard Method for Deleting Codes
4.12.2 Search Method for Deleting Codes
4.13 RELAY CODE ASSIGNMENT
4.13.1 Using Standard Method
4.13.2 Using Search Method
4.14 PIN LENGTH/FACTORY SETTINGS
4.15 REPLACE PROGRAMMING CODE
4.16 REPLACE NORMAL/SECURE CODE
LIFE TIME WARRANTY
TECHNICAL SUPPORT
.............................19
.............................19
.............................20
.............................20
.............................21
.............................21
.............................22
..............................23
.............................24
.............................26
.............................27
.............................27
.............................28
.............................32
.............................33
.............................34
..............................34
.............................34
.............................35
.............................35
.............................36
.............................38
.............................38
.............................39
.............................40
..............................40
.............................41
.............................42
.............................43
.............................43
.............................44
.............................44
Page iii