Instruction manual

Programming

7400 & 7450 Manual Page 24

4.6 CHANGING THE NORMAL/BYPASS CODE

The Normal/Bypass Code is also used to turn the door chime on and off.

Door chime will only function with an external sounder. Refer to

Figure 7 on page 13.

Note:

• The chime is only heard when the Lock relay is activated

by a valid code entry.

• Invalid entries; you will hear a long beep and the keypad

will return to Normal Mode.

• Code 0000 will erase and deactivate the Normal/Bypass

Code.

1) Enter the Programming Mode.

GREEN

THE MODE INDICATOR FLASHES RED

THE DOOR INDICATOR STAYS GREEN



MODE

DOOR

GREEN

MODE

DOOR

2) Depress -4- to enter Menu 4.

3) Enter the new code you wish

to set as the Normal/Secure Code.

4) System returns to Normal Mode.

YOU WILL HEAR 3 BEEPS

THE MODE INDICATOR TURNS GREEN

THE DOOR INDICATOR TURNS OFF

RED