Instruction manual

Programming
7400 & 7450 Manual Page 22
F
Note:
• Auxiliary Code does not function in Secure Mode.
• Auxiliary Code only works when the Auxiliary Mode is 0,
1, 8, or 9.
• Invalid entries; you will hear a long beep and the keypad
will return to Normal Mode.
• Code 0000 will erase and deactivate the Auxiliary Code.
4.4 CHANGING THE PROGRAMMING CODE
F
Note:
• The code 0000 is not valid, thus the Programming Code
cant be erased.
• Invalid entries; you will hear a long beep and the keypad
will return to Normal Mode.
1) Enter the Programming Mode.
GREEN
THE MODE INDICATOR TURNS ORANGE
THE DOOR INDICATOR STAYS GREEN
MODE
DOOR
GREEN
MODE
DOOR
2) Depress -2- to enter Menu 2.
ORANGE
3) Enter the new code you wish
to set as the Auxiliary Code.
4) System returns to Normal Mode.
YOU WILL HEAR 3 BEEPS
THE MODE INDICATOR TURNS GREEN
THE DOOR INDICATOR TURNS OFF