Instruction manual

7400 & 7450 Manual

Programming

Page 21

4.2 CHANGING THE OPEN CODE

The Open Code is mainly used as a method to quickly test the Lock

relay during installation. The factory 4 digit default setting for the Open

Code is 2580.Forsecurityreasonswhentherstuserisaddedto

the keypad or the auxiliary code is changed, the default Open Code

will automatically be deleted. Non default codes will not be erased

automatically.

Note:

• Open Code does not function in Secure Mode.

• Invalid entries; you will hear a long beep and the keypad

will return to Normal Mode.

• Code 0000 will erase and deactivate the Open Code.

4.3 CHANGING THE AUXILIARY CODE

The Auxiliary Code is mainly used as a method to quickly test the aux-

iliary relay during installation. The default 4 digit factory setting for the

Auxiliary Code is 0852.Forsecurityreasonswhentherstuserisadded

or the Open Code is changed, the default Auxiliary Code will automati-

cally deleted. Non default codes will not be erased automatically.

1) Enter the Programming Mode.

GREEN

THE MODE INDICATOR TURNS RED

THE DOOR INDICATOR STAYS GREEN

MODE

DOOR

GREEN

MODE

DOOR

2) Depress -1- to enter Menu 1.

RED

3) Enter the new code you wish

to set as the Open Code.

4) System returns to Normal Mode.

YOU WILL HEAR 3 BEEPS

THE MODE INDICATOR TURNS GREEN

THE DOOR INDICATOR TURNS OFF