Instruction manual

Programming

7400 & 7450 Manual Page 20

4.1.1 Entering the Programming Mode

Note:

• The keypad must be in Normal Mode to enter Program-

ming.

• The factory default 4 digit Programming Code is 1234.

• If a Programming Code is not entered within 5 seconds,

the keypad will return to its Normal Mode.

4.1.2 Exiting the Programming Mode

Note:

• Invalid entries may reset the keypad back to Normal

Mode.

• If no keys are pressed for 1 minute, while in Programming

Mode, the keypad will exit the Programming Mode and

return to Normal Mode.

1) Depress the # key, in rapid

succession .

MODE

DOOR

MODE INDICATOR WILL TURN OFF

DOOR INDICATOR WILL TURN RED

2) Enter your Programming Code.

IF THE PROGRAMMING CODE IS VALID,

THE DOOR INDICATOR WILL TURN

GREEN AND THE KEYPAD WILL ENTER

PROGRAMMING MODE.

RED

GREEN

MODE

DOOR

1) To exit the Programming Mode,

depress the # key twice, in succession.

GREEN

YOU WILL HEAR THREE BEEPS

THE DOOR INDICATOR TURNS OFF

THE MODE INDICATOR TURNS GREEN

MODE

DOOR

This indicates the keypad has

returned to Normal Mode.