Instruction manual

Operation

7400 & 7450 Manual

3.3.2 Switching From Secure to Normal Mode

The default factory setting for the Normal/Secure Code is 3838.

The auxiliary mode of the keypad can also be used to switch the mode

of operation from Secure to Normal Mode and vice versa. If the auxiliary

input is selected it deactivates the Normal/Secure Mode Code.

Refer to Setting the Auxiliary Mode , paragraph 4.8.

3.3.3 Switching From Normal to Bypass Mode

By default, there is no Normal/Bypass Mode Code. The Normal/Bypass

Codemustrstbeprogrammedtousethisfunction.Refertoparagraph

4.6 to create or modify the Normal/Bypass Code.

Page 16

1) Enter the Normal/Secure code.

MODE

DOOR

GREEN

MODE INDICATOR FLASHES GREEN

MODE



DOOR

2) Depress the # key to confirm

the change.

MODE INDICATOR STAYS GREEN

MODE

DOOR

GREEN

1) Enter the Normal/Bypass code.

MODE

DOOR

GREEN

MODE INDICATOR FLASHES ORANGE

MODE



DOOR

2) Depress the # key to confirm

the change.

MODE INDICATOR STAYS ORANGE

MODE

DOOR

ORANGE