Instruction manual

Operation
7400 & 7450 Manual
3.2 USER LEVELS
7400 and 7450 keypads accept up to 500 users and provide entry via
the use of PIN Codes. Each user is allocated two memory slots:
1) Primary Code 2) Secondary Code
The way in which the two memory slots are programmed, determines a
users access level. It also establishes what access is granted for each of
the three modes of operation. There are three user levels:
3.2.1 Normal User
A normal user only has a Primary Code and is granted access only
when the keypad is in Normal or Bypass Mode.
3.2.2 Secure User
A secure user must have a Primary and Secondary Code assigned, and
the two codes can’t be the same. The secure user can gain access in
any mode of operation. In Normal Mode the secure user must use the
PrimaryCodetogainentry.InSecureModethesecureusermustrst
enter the Primary and then the Secondary Code, in order to enter.
3.2.3 Master User
A master user must have an identical Primary and Secondary Code as-
signed. The codes are entered with the same PIN. The master user can
enter during any mode of operation by entering their code once.
3.3 SWITCHING OPERATIONAL MODES
3.3.1 Switching From Normal to Secure Mode
The default factory setting for the Normal/Secure Code is 3838
Page 15
1) Enter the Normal/Secure code.
MODE
DOOR
GREEN
MODE INDICATOR FLASHES RED
MODE

DOOR
2) Depress the # key to confirm
the change.
MODE INDICATOR STAYS RED
RED
MODE
DOOR
RED