User guide

36
SETTING A WAKE UP CALL
If your keyset is programmed with a WAKEUP key you can use this key to enter a
WAKE UP time for a guest room, clear a previously set wake up time or print out a
list of wake up calls to a guest room since that guest checked in.
ACTION DISPLAY
1. To set a wake up call for a guest Wake Up Call
room. Press the WAKEUP key and PRINT SET CANCEL
select SET.
2. Enter the guest room number Enter Room
on the keypad. Number:XXXX
Enter Wake Time
HHMM
3. Select the wake time setting as Enter Wake Time
TODAY or DAILY. TODAY DAILY
XXXX Wake HH:MM_
YES CLEAR EXIT
4. If the time shown is correct press
YES to set the wake up call.
5. If the time shown is incorrect press
the CLEAR key and re-enter the time.
6. If you want to exit without setting
the wake up call press the EXIT key
and this will return you to idle.
NOTE: Wake up calls use the system clock as a reference, so the system clock must
be set correctly.
SETTING A WAKE UP CALL
FROM A GUEST ROOM
• Lift handset and receive dial tone. Dial the Wake Up feature access code.
• Enter 4 digit military time for the wake up call.
• Receive confi rmation tone and hang up.
NOTE: When using a digital phone in a guest room, a wake up key may be used
instead of dialing an access code.
37
CANCELING A WAKE UP CALL
ACTION DISPLAY
1. Press the WAKEUP key and Wake Up Call
select CANCEL. PRINT SET CANCEL
2. Enter the room number, either manually Enter Room
on the keypad or by pressing the NUMBER:XXXX
associated DSS key.
Room:XXXX Wakeup
CANCEL EXIT
3. The display will confi rm the room
number as shown. Pressing CANCEL
will cancel a wake up call set for this
room.
4. Pressing EXIT will return your
keyset to IDLE and take no action
regarding the wake up calls.
NOTE: Only an administrator keyset can cancel a wakeup call.
Home Page
Hospitality
Table of Contents