User guide

21
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 705 SYS SPEED DIAL
Display shows the first number 5
00:
2. Dial the speed bin desired (e.g., 505) OR SYS SPEED DIAL
press UP or DOWN to choose and 505:
press the right soft key to move the cursor
3. Enter the access code (e.g., 9—the system SYS SPEED DIAL
will automatically insert a dash) followed by 505:9–121223456789
the phone number (up to 24 digits long)
and press the right soft key to return to
step 2
4. Press the F key to toggle to P
rogram SYS SPEED NAME
System Speed Dial Names,step 3 to 505:
enter the name
5. Press TRSF to store and exit
programming OR press SPK to store
and advance to the next program
DEFAULT DATA: NO SPEED NUMBERS ASSIGNED
system_administration_guide.qxp 4/17/2010 11:38 AM Page 30
PROGRAM SYSTEM SPEED DIAL NAMES
This program is used to assign a character name or identification for each system
speed dial location.This name enables you to locate the speed dial number when
you are using the directory dial feature.You may assign a name 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll through speed dial bins.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
ACTION DISPLAY
1. Press TRSF and then 706 SYS SPEED NAME
Display shows the first name 5
00:
2. Dial the system speed number (e.g., 505) SYS SPEED NAME
OR press UP or DOWN to select the entry 5
05:
number and press the right soft key to
move the cursor
3. Enter the name as shown in Program SYS SPEED NAME
Station Names and press the right soft 5
05:SAMSUNG
key to return to step 2 OR press the
F key to toggle to the speed dial number
to return to P
rogram System Speed Dial
Numbers,step 4
4. Press the right soft key to return to step 2
above OR press TRSF to store and exit
programming OR press SPK to store and
advance to the next program
22
system_administration_guide.qxp 4/17/2010 11:38 AM Page 31
Home Page
Table of Contents
Sys Admin