Troubleshooting guide

1336 PLUS - 6.16 - September, 2001
Control Logic Wiring and Adapters 2-5
The following table defines the input state of the Speed Select inputs for a
desired frequency source.
Table 2.A Speed Select Input State vs. Frequency Source.
Local Programming
For local programming and control information, refer to the 1336 PLUS II
User Manual.
Human Interface Module
For a complete description of the Human Interface Module (HIM) including
key descriptions, module removal and overall HIM operation refer to
Chapter 3 of the 1336 PLUS II User manual (1336 PLUS 5.3).
Speed Select 3 Speed Select 2 Speed Select 1 Frequency Source
Open Open Open [Freq Select 1]
Open Open Closed [Freq Select 2]
Accessed through [Freq Select 2] parameter [Preset Freq 1]
Open Closed Open [Preset Freq 2]
Open Closed Closed [Preset Freq 3]
Closed Open Open [Preset Freq 4]
Closed Open Closed [Preset Freq 5]
Closed Closed Open [Preset Freq 6]
Closed Closed Closed [Preset Freq 7]