Technical data

23
TABLE OF HYDRAULIC
OIL AND LUBRICANTS
CHA RAC TE RI STI CS
GRU FASSI
23 TABLE OF HYDRAULIC OIL AND LUBRICANTS
CHA RAC TE RI STI CS
HYDRAULIC OIL WITH HIGH VISCOSITY: ISO-L-HV
Minimal exter nal maximal oil Gra da tio n
tem pe ra tu re: tem pe ra tu re:
-35°C +45°C ISO VG 32
-20°C +75°C ISO VG 46
HYDRAULIC OIL WEAR RESISTANT: ISO-L-HM
Minimal exter nal maximal oil Gra da tio n
tem pe ra tu re: tem pe ra tu re:
-10°C +60°C ISO VG 32
+ 0°C +75°C ISO VG 46
+ 5°C +85°C ISO VG 68
+10°C +90°C ISO VG 100
GREASE (for centralized system)
Use only GREASE NILEX EP1 of the firm NILS.
NOTE: Do not ABSOLUTELY mix different types of grease.
GREASE
(for slew ring, extension booms, outrigger supports...)
-30°C up to +130°C EP1 Gradation (cold climate)
EP2 Gradation (warm climate)
All grease used must be free from acid and resin, not hygroscopic and
long-life such as
BP GREASE LTX-EP1\EP2 or ELF EPEXA 1\2
ESSO BEACON EP1\EP2 or TEXACO EP1\EP2
MOBIL EP1\EP2 or SIMILAR.
HYDRAULIC OIL FOR MOTOREDUCER
Classification ISO-L-CC
Gra dation EP ISO-VG 150
LUBRICATING OIL (for winch cable)
The most suitable here is a general-purpose lubricating oil with about SAE
30° viscosity. A lubricating oil containing non-stick additives is recommen-
ded if the cables are expected to move quickly through the pulleys.
BRILUBE 50 (BRITISH ROPES - BRINDON)
( ! ) WARNING ( ! )
Don’t use greases with solid particles as “Bi sul phide of Mo lyb de num”
(not compatible with eventual teflon bushes).