Technical data

10. Message “LOAD OK” (fig. 10)

This message confirms that the load does not exceed the lifting limits of the

crane and of the manual extension selected.

CLOSING OF THE PROCEDURE

ll the crane functions will still be kept disabled. To start operating press

the

“INDEX” key (control panel fig. 10, or radio-remote control fig. D always

with the selector in position “A” fig. C).

Figure C Figure D

For an overall view of the procedure, we attach the diagrams showing all the pas-

sages and messages that can be displayed during the procedure according to the

various situations that may take place.

The script "EXIT" in the block diagram allows to exit the procedure.

FURTHER MESSAGES

After releasing the lever in neutral position you can find the following messages

If you keep pressed the "F2" key “F2” on the control panel or “LMI” on the push-

button panel, it is possible to have an indicative evaluation of the weight applied on

the hook (fig. 11).

a. “PRESSURE ERROR” (see fig. 12)

It warns you that the system found an error in the pressures of the lifting

booms. The whole procedure must be restarted.

18.2

USE OF IMPLEMENTS

GR2_45»65_3_4_5_SE

fig. 10

fig. 11

fig. 12

selector on A

“INDEX”