Technical data

PANELS OF THE RADIO-REMOTE CONTROL

Figure A (left side) Figure B (right side)

HOW TO PREDISPOSE THE USE OF MECHANICAL EXTENSIONS ON CRANE

OR ON JIB

Note: In case of crane with slew ring and top seat, all the procedures mentio-

ned below can be executed from both the control panel and the radio-remote

control.

1. Initial display (Fig. 1)

Starting from the standard menu of the electronic lifting moment limiting

device displaying the pressures of the lifting rams (fig. 1), keep the “F1”

key (control panel), or the “+” and “ENTER” key (radio-remote control

with the selector on “A”, fig. A and B) pressed for some seconds.

2. Choice the installation of the manual extensions on Crane or on Jib. (Fig. 2)

If the crane features the installation of the manual extensions both on the crane

and on the jib, after the initial display, when you keep the “F1” (control panel)

or “+” and “ENTER” key pressed (radio-remote control), the program displays

the message illustrated in Figure 2.

Use the "+" button to select JIB if in the actual configuration the manual exten-

sions are mounted on JIB or CRANE if the manual extensions are mounted on

the crane.

18.2

USE OF IMPLEMENTS

GR2_45»65_3_4_5_SE

fig. 1

fig. 2

selector on A

“+”

“ENTER”

“INDEX”