Technical data

17
USE OF IMPLEMENTS
GRU FASSI
17 USE OF IMPLEMENTS
17.1 Generality
The crane, in load condition H1B3, can be provided with implements such as:
- Manual extensions
- Winches
- Hydraulic extensions
- Personnel baskets
- Clam ‘shell buckets
- Augers
(!) When using an implement it is always necessary to check that its weight,
dimension and capacity is matched to the crane performances.
For further information please refer to FASSI GRU IDRAULICHE
Warning and norms for crane use also apply for hydraulic implement use.
Before using a personnel basket it is necessary to provide the crane with the
safety devices requested by the local norms in force, EN280 in Europe, and
prior to use of the crane it has to be tested and inspected in accordance with
the local legal requirements.
(!) When the crane is fitted with implements or laid on the truck body it is necessary
to check they are locked to assure the impossibility of accidental movements and
that the led signalling maximum obstruction in height (if fitted) confirms the cor
rect positioning of the crane.
(!) The crane can operate, intermittently and not continuously, with lifting
devices other than the hook, only on loose and light materials (not on
scrap iron).
(!) ATTENTION (!)
In case of using the crane with lif-
ting devices other than the hook,
the access to the working area at
the persons must be prevented.
The dimensions and the capacity of
the implements must be proportio-
ned with crane performances.
(!) WARNING (!)
CRUSHING (F) OR PUSH (F) MANOEUVRES ARE NOT PERMITTED.