Technical data

1
INDEX
GRU FASSI
FASSI CRANE
use and maintenance
ORIGINAL INSTRUCTIONS
THANK YOU FOR SELECTING ONE OF FASSI CRANES.
This crane is the result of FASSI philosophy: ongoing research, rigorous
testing, data verification, and analysis of performances.
Many years of experience has allowed us to grant you the maximum safety of
operation together with the optimization of machine performances.
All this represents the core of FASSI quality system.
FASSI quality system is in conformity with
UNI EN ISO 9001:2000 (ISO 9001:2000)
The fitment of the crane on the vehicle must be carried out in accordance with
the instructions given by FASSI in the manual for hydraulic crane fitting and the
relevant chassis manufacturers directives.
The Manufacturer declines all responsibility and guarantee if the fitting is
entrusted to workshops without sufficient technical capability to carry out the
work in conformity.
Be sure that the unit has been installed, inspected and tested in accordance
with the local legal requirements.
As well as the principal safety norms, this manual contains a description of the
crane and the instructions for use and maintenance.
The following instructions refer to mobile cranes in general and must be inte-
grated with the manual for use supplied by the centre responsible for the crane
fitting on truck, vehicle or other type of structure.
READ THIS MANUAL CAREFULLY prior to use or any maintenance. A few
minutes spent now could save time and labour later.
Always conform to the safety norms and the instructions for use and mainte-
nance contained in the present manual in order to guarantee a long life to the
crane.
NOTE
The original version of the present manual is in italian.
The spare parts catalogue for the crane can be viewed in the Internet
site: www.fassicat.com