Specifications

www.pulsar.pl PowerSecurity
16
Electrical parameters at the AUX outputs of the PSU:
- output voltage at the AUX1 output [V]
- output voltage at the AUX2 output [V]
- total output current
- the fuse status at the AUX1 output
- the fuse status at the AUX2 output
In case of fuse activation, the symbol changes to red and flashes.
Information window with the PSU type
Current battery status:
- battery voltage [V]
- charging level
- TEST: performing battery test (see section 5.4)
- battery fuse status
- battery temperature
- resistance of the battery circuit
In case of fuse activation, the symbol changes to red and flashes.
EXTo - controlled relay output EXTo status.
its backlight changes into red and the contacts change their position
(C closed with NO)
On – the start button of the controlled relay output EXTo.
EXTi – input of the collective failure EXTi status.
In case of the input activation, its backlight changes into red.
TAMPER – TAMPER input status.
In case of the input activation, its backlight changes into red and the
contacts change their position (opening).
Status of the technical outputs of the PSU.
EPS - AC power ON indication
open, red backlight = AC power failure
closed, green backlight = AC power ON:OK.
PSU – PSU failure indication
open, red backlight = failure
closed, green backlight = PSU status OK.
APS – battery failure indication
open, red backlight = battery failure
closed, green backlight = battery OK.
ALARM – collective failure indication
Fault example, the output is open and highlighted in red.