Instruction manual

51
VF Menu List
Chapter 4 Menu Configuration and Detailed Settings
4-2-6 Network Menu
This menu is not displayed in web browsers or on tablet
devices.
Page Configuration
item
Default Settings Remarks
<LAN Setting>
IP address
settings
DHCP Disabled Enabled, Disabled Sets whether to automatically obtain an
IP address from a DHCP server.
IP Address 192.168.1.1 0.0.0.0 to 255.255.255.255 If DHCP is enabled, displays the IP
address obtained from the DHCP server.
Subnet Mask 255.255.255.0 0.0.0.0 to 255.255.255.255
Default Gateway 0.0.0.0 0.0.0.0 to 255.255.255.255
Set -- Execute by Enter.
<Wi-Fi Setting>
Wi-Fi settings
Wi-Fi Disabled Enabled, Disabled Enables/disables the Wi-Fi settings.
Enable for connection.
Wi-Fi Status No connectivity Excellent, Good, Weak,
No connectivity
Displays the communication/connection
status.
SSID (Blank) (Blank), String of up to 32
characters
Displays the network name.
Network Type -- Infra, ad-hoc Displays the network connection mode.
IP Address -- 0.0.0.0 to 255.255.255.255 Displays the value obtained from the
DHCP server.
Subnet Mask -- 0.0.0.0 to 255.255.255.255
Default Gateway -- 0.0.0.0 to 255.255.255.255
Scan Network -- Execute by Enter. Scans the network access point.
Connect Manually -- Execute by Enter. Used to enter the network access point.
ad-hoc Setting -- Execute by Enter. Configures ad-hoc network mode.
SSID (Blank) (Blank), String of up to 32
characters
Sets the network name. Displayed only
when Scan Network is executed.
Network Type Infra Infra, ad-hoc Displays the connection mode.
Authentication WPA2PSK WPAPSK, WPA2PSK Sets the network authentication method.
Displayed only when Scan Network is
executed.
Encryption AES TKIP, AES Sets the data encryption method.
Displayed only when Scan Network is
executed.
WEP Key Index 1 1, 2, 3, 4 Selects the WEP key index number
when using ad-hoc mode.
Input Select ASCII8-63 ASCII8-63, HEX64,
ASCII5, ASCII13, HEX10,
HEX26
Selects the network encryption key
format.
ASCII8-63: 63 characters in 8-bit ASCII
format.
HEX64: 64 digits in hexadecimal format.
ASCII5: 5 characters in ASCII format.
ASCII13: 13 characters in ASCII format.
HEX10: 10 digits in hexadecimal format.
HEX26: 26 digits in hexadecimal format.
ASCII5, ASCII13, HEX10, and HEX26
are valid only in ad-hoc mode.
Key (Blank) 63-character ASCII or 64-
digit hexadecimal
Sets the network encryption key.
Set -- Execute by Enter.