Installation manual

Overview
S1A53838 09/2011 31
Graphic display option
Description of the graphic display option
With the graphic display option, which works with FLASH V1.1IE29 or higher, it is possible to display more text
information than can be shown on the integrated display terminal.
Note: Keys 3, 4, 5 and 6 can be used to control the drive directly, if control via the graphic display option is
activated.
WARNING
LOSS OF CONTROL
z Do not use the ATV21 and ATV12 terminal display (VW3A21101 and VW3A1006).
z Only VW3A1101 is compatible with ATV212.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
1 Graphic display
2 Function keys
F1, F2 and F3: not
assigned
F4: Loc/Rem
3 STOP/RESET key
4 RUN key
5 Jog dial:
• Press (ENT):
- To save the current value
- To enter the selected menu or parameter
• Turn +/-:
- To increment or decrement a value
- To go to the next or previous line
- To increase or decrease the reference if control via the graphic
display option is activated
7 ESC key: Press to select the
graphic display mode.
- Run mode (default on power-up)
- Programming mode
- Monitoring mode
Can also be used to go back to
the previous menu.
Also corresponds to the MODE
button of the embedded HMI
6 FWD/REV key: Press to
reverse the direction of rotation of
the motor