Installation manual

Overview
30 S1A53838 09/2011
Submenus
The ATV212 drive features 6 submenus (see diagrams starting on page 24) that are designed to reduce the time and
effort required to program application parameters. Parameters can be modified within these submenus.
AUH [5 LAST PARAM CHANGE]
The AUH submenu displays, in reverse chronological order, the last 5 parameters that have been changed from their
factory settings. Each time the AUH submenu is accessed, it searches for the latest parameters changed from their
factory settings. If every parameter is at its factory settings, no display is generated.
Parameter Lock F700 is not displayed in the AUH menu, even if its value has been changed (see page 64
).
AUF [QUICK MENU]
The AUF submenu provides ready access to the ten basic parameters commonly used in programming the drive. In
many cases, programming the ATV212 drive is complete when these 10 parameters have been properly set (see
chapter Quick Menu page 55
).
GrU [ALL PARAM CHANGE]
The GrU submenu displays every parameter that has been changed from its factory settings. Each time the GrU
submenu is accessed, its content is refreshed with the latest list of parameters changed from their factory settings. If
every parameter is at its factory setting, no display is generated.
Parameters Fn and F470 – F473 are not displayed in the GrU menu, even if their values have been changed.
F– – – [EXTENDED MENU]
The extended parameter submenu provides access to parameters used for special settings and applications.
10 [I/O MENU]
The IO submenu provides access to parameters used for input/output setting.
COM [COMMUNICATION MENU]
The COM submenu provides access to parameters used for the communication setting.