Installation manual

Parameters Reset Tables
166 S1A53838 09/2011
Parameter values that vary according to reset type
The table below lists the parameters whose values, after a reset, depend on the reset type
([Parameter reset] (tYP) = 1, [Parameter reset] (tYP) =2, or [Parameter reset] (tYP) = 3).
To determine the value of a parameter after a reset, locate the parameter in the first column and read across the
row to the column that corresponds to the reset type. The number that appears at the intersection of the
parameter and the reset type is the parameter’s value after a reset of the corresponding type.
Parameters whose values after a reset vary by reset type
Parameter Description Unit
Factory Reset
tYP = 3
50 Hz Reset
tYP = 1
60 Hz Reset
tYP = 2
CMOd
[Command mode sel] –000
FMOd
[Frequency mode sel] –111
FH
[Max frequency] Hz 50 50 60
uL
[Upper limit freq] Hz 50 50 60
uL
[Motor rated freq.] Hz 50 50 60
F170
[Mot 2 rated Freq.] Hz 50 50 60
F204
[VIA freq. point 2] Hz 50 50 60
F213
[VIB freq. point 2] Hz 50 50 60
F303
[Number auto reset] –000
F480
[No load cur. coef] % 100 0 100
F481
[In noise comp. filter] micro-seconds 0 100 0