Installation manual

Serial Communication Parameters
142 S1A53838 09/2011
Parameters F890 – F896 should be adjusted only if the corresponding optional equipment has been
installed. See the ATV212 catalog for more detail.
When the value of F829 parameter is changed, the adjustment range and factory setting of F890 to
F896 are automatically setted.
There are 2 connection port witch support different communication protocol, embedded or using option board.
The two channels could communicate simultaneously with the product, but only one could send the logical or
frequency command to the drive:
z The two channel used for monitoring
z One channel used for command (run order and speed) and the second for monitoring.
The configuration parameters of communication are taking account at next power up of the product.
(1) Time out disconnection board, internal default value (3s)
Code Name / Description
F890 [Network adress]
F891 [Network baud rate]
F892 [Network time out]
F893 [Instance number H]
F894 [Instance number L]
F895 [Max master]
F896 [Max info frames]
Modbus APOGEE FLN P1 METASYS N2 BACNET
Setting
Range
Factory
setting
Setting
Range
Factory
setting
Setting
Range
Factory set-
ting
Setting
Range
Factory
setting
F829
- 1332244
F890
0 to 65535 0 1 to 99 99 1 to 255 1 0 to 127 0
F891
0 to 6 0 1 to 5 5 1 to 5 5
F892
20 to 600 100 20 to 600 100 20 to 600 100
F893
0 to 4194 0 0 to 4194 0 0 to 4194 0
F894
0 to 999 0 0 to 999 0 0 to 999 0
F895
0 to 127 0 0 to 127 0 0 to 127 127
F896
0 to 100 0 0 to 100 0 1 to 100 1
Description RJ45
Modbus
Network
Modbus
Network
Apogee P1
Network
Metasys N2
Network
BACnet
Network
LonWorks
F829
Network selection - ppppp
F800
Modbus RJ45 Baud rate p -----
F801
Modbus RJ45 Parity p -----
F802
Modbus address pp ----
F803
Modbus time out pp---(1)
F851
Com fault behavior pppppp
F820
Modbus Net Baud rate - p ----
F821
Modbus Net Parity - p ----
F890
Network parameter - - ppp -
F891
Network parameter - - p - p -
F892
Network parameter - - ppp -
F893
Network parameter - - - - p -
F894
Network parameter - - - - p -
F895
Network parameter - - - - p -
F896
Network parameter - - - - p -